Posts Tagged: kids activities

How to Make a Paper Bird!

A Paper Project by Inspire(d) Media/Aryn Henning Nichols

These paper chicks are a fun spring project for the young and young-at-heart!

Supplies:
Construction paper or card stock in whatever colors you want for body, beak, and eyes (scraps work well, but make sure you have at least one piece that is 10-11 inches long)
Glue stick
Scissors
Sharpie or black pen or marker
Ruler
Pencil
Toilet paper roll or other similarly round object (for tracing)

1. Mark an inch-wide strip along the long side of the paper with your pencil. Cut. Repeat to get a second strip.

2. To create the body, roll first strip and glue at the bottom, leaving roughly three inches at end for start of tail.

3. Cut second strip in half. Roll and glue at bottom to create head.

4. Glue head to body…you can position further up the body so the chick is looking up, or down if you’d like it to be pecking the ground!

5. Mark a 2-inch by 3/4-inch strip on your beak paper (mine’s traditional orange, but do what you want to make it your own!). Cut.

6. Fold your cut piece in half and trim the corners, making the middle attached part the small side.

7. Fold in the bottom sides so there is a little lip to attach glue.

8. Glue the beak to the head wherever you’d like the beak positioned. Little fingers are handy here – I find securing the bottom, then the top is easiest.

9. Cut the remaining half strip of paper (mine’s yellow) in half again. Then cut in “feathers” – just snip your scissors into the strip multiple times, the long way, leaving some space for glue at one end. Snip into the bird’s current tail as well.

10. Glue feathers to tail and then curl with your pencil (if desired).

11. Use something circular to draw a circle on your paper for the wings (I used a candle holder, but a spice jar or toilet paper roll would work well). Cut out, then cut in half.

12. Like the tail feathers, snip your scissors into the rounded sides to create wing “feathers”. Fluff up if you’d like.

13. Glue, slightly overlapping, to the body.

14. Cut two small circle for eyes (I used white paper, but you can certainly have colored eyes!). The Sharpie works well to trace. Cut out, then mark the pupil (black part) with a marker or pen.

15. Glue eyes to body, and then you’re done! Happy Spring! If you’d like to share a photo of YOUR spring chick, please tag @Inspire(d) Media on Facebook (and like us at facebook.com/iloveinspired). Thanks for making our Spring 2012 Paper Project!

How to Make a Paper Lantern!

Supplies:

Paper (I like red for Chinese New Year, but you can use any you like, 8.5 x 11 works best)
Pencil
Tape or Stapler
Scissors

1. Make sure the your paper is wrong side up (if you’re using patterned paper, the pattern would be facing the table). Measure 1 inch from the short end and make a line with a pencil. Cut along the line and save this piece for your handle.

2. Fold the remaining paper lengthwise (keeping the wrong side out).

3. Measure 1 inch along the long (open) edge and make a line. Then, along the fold, make a mark every inch.

4. Cut up to the full line at each mark.

5. Turn your paper right side out.

6. Roll it into a tube and tape or staple the edges together.

7. Push the lantern down to open up the slits a bit.

8. Tape or staple the handle inside the top, and you’re done! Make several to hang in a doorway or just a few to decorate your home. But keep away from flames – these are for decorative purposes only!

Happy Chinese New Year!

How to: Make a Turkey Hat!

What you’ll need:
Inspire(d) Turkey Page 29 from the Fall 2011 issue (Get it here!)
Scissors
Brown paper bag
Cardboard (optional – cereal boxes work well)
Glue (stick, Elmer’s, whatever works…but probably NOT Super Glue)

1. Out of the paper bag, cut a band wide enough to fit your (or your friend’s, child’s, spouse’s) head.

2. Wrap the paper bag band around your head and mark or make note of where it needs to be glued. Then, of course, glue it!

3. Next, cut a circle for your turkey’s face. You can use the template on the Inspire(d) page if you like, just cut out the whole circle and trace.

4. Cut out pieces, as directed, from Inspire(d) Magazine (you may choose to back the “feathers” and “wings” with cardboard if you want them to not flop. If so, and if you’re smarter than me, glue the cereal box cardboard sheet to the entire turkey page before step 4, then cut just once).

5. Glue the feathers in place – they go on the inside back of the headband, and it might help to line them up along the back so you know how you want them spaced.

6. Glue the eyes and wattle to the paper bag circle. Fold the beak where it says “fold here,” and glue just the side with the writing (it will read upside down) to the turkey face. This way the beak can open and shut. Now on the opposite and outside of the band, glue the face in place.

7. Center the wings around the face, and glue on each side.

8. You’re done! Place on head. Maybe do a dance. Happy Thanksgiving! XO – A & B